Hisense Group KF-5002GWE User Manual download pdf (Page 26)

　　　Appendix: Installation

2. INSTALLATION LOCATION

2.1 Indoor unit 2.2 Outdoor unit

WARNING

Maintain the required space

around the appliance to

prevent overheat.

The location for installation of the appliance should not be in an

area with the following:

Direct sunlight

Heat resource

Inflammable gas

Thick oil fog

The appliance should be installed in an area,

Where the inside space can be evenly conditioned, or

Which is strong enough for the appliance, or,

Having the shortest distance for the copper tubes and water

drain hose, and

Having desired space around the appliance for maintenance

and ventilation.(Figure 1)

Min. 5cm

Figure 1

Tube arrangement

L H Added Refrigerant Provided Tube(M)

(g/m)

15 7 20 4

L: Maximum length of the tube connecting the indoor unit and the

outdoor unit.

H: The height difference between the indoor unit and the outdoor

unit.

Tube length(L)

Height difference(H)

Indoor unit

Outdoor

unit

* If the length of the tube is exceed 7m, an additional 20g/m of

refrigerant should be added per 1m.

Figure 2

The indoor unit should not be

installed below a height of 1.8m.

The outdoor unit should be installed away from the following:

Heat source and fan exhausting (Figure 3);

Director sunlight;

Figure 3

The outdoor unit should be installed in an area with,

Cool temperature;

Good ventilation;

Desired space for air inlet, outlet and maintenance

(Figure 4)

２ｍ　　

Air inlet

Min. 10cm

Min. 40cm

Min.10cm

Air inlet

Ground

Valve side

Min. 25cm

Top obstacle

Air outlet

Obstacle

Figure 4

Strong base (10x10cm concrete or alike). The appliance

should be placed not less than 10cm high (Figure 5).

Fix the base with firm bolts to reduce vibration and noise.

Air inlet

Concrete or alike

Firm bolts(4)

Min. 10cm

About 10cm

Abo

ut 40cm

1 2 ... 21 22 23 24 25 26 27 28 29

Comments to this Manuals

No comments

Hisense Group KF-5002GWE User Manual Page 26

Comments to this Manuals